Avnix’s Forklift Loader Attachment is designed for use with your current forklift. “Dustpan” design is perfect for moving snow, gravel, dirt, sand, trash, debris or refuse. Loader attachment includes an in seat release cable to dump contents of bucket scoop. Loader attaches fast and simply to most forklifts. Beveled front edge for better scooping ability. The loader fork pockets measure 7-1/2″W x 2-1/2″H on 24″ centers. All welded steel design with a baked-in blue powder coat finish for a long life.
Operation: Position fork truck into front end loader; Secure loader attachment to fork truck mast with safety chain; Run release cable to forklift driver cab; Drive Loader into the material your moving; Drive to dumping spot; Raise forks and pull release to dump load; loader attachment returns to locked upright position when set down on ground.
- Easily Connects To Forklift
- Trip Cord Release
- 90º Dump Angle
- Capacity 4000 lbs.
- Ideal For Snow, Gravel, Sand, Debris, Fertilizer, Mulch, Trash, Dirt Waste or Refuse
|Fork Mounted Front End Loader Forklift Attachment|
|AVFL-4000||69-3/4″x 63-1/4″x 22-5/8″||4,000 lb||90º||1 1/3||525|
|AVFL-LEKP||WELDED LEAK PROOF OPTION||0|
Receiving Loader Attachment Instructions:
After delivery, remove the packaging from the product. Inspect the product closely to determine whether it sustained damage during transport. If damage is discovered, record a complete description of it on the bill of lading. If the product is undamaged, discard the packaging.
NOTE: The end-user is solely responsible for confirming that product design, installation, use, and maintenance comply with laws, regulations, codes, and mandatory standards applied where the product is used.
Fork Mounted Front End Loader Fork Truck Attachment Sales
FREE Quote 281-342-0200